-
Principles of Injection Mold Design
Ⅰ. Mold opening direction and parting line of injection mold designAt the beginning of the design of each injection product, the mold opening direction and parting line should be determined first to ...
More+
-
Several Parameters That Should Be Paid Attention to in the Injection Mold Design
There are two templates on the injection molding machine, one does not move, called fixed template; the other can move, called moving template. The mold is fixed on the two templates by screws and pre...
More+
-
Common Quality Problems of Plastic Injection Parts
After injection molding, there are some bad problems, which will affect the assembly efficiency or the performance of the whole machine. There are certain differences with the predetermined quality st...
More+
-
Common Quality Problems and Causes of Plastic Injection Parts
1. Chromatic aberration of injection molded parts: a common problem between the casing and the appearance parts.① Factors in raw materials: including toner replacement, plastic material grade change,...
More+
-
Precautions for Maintenance of Injection Moulding Dies
The maintenance procedures required for each injection molding location depend on different mold cycles. Below are some general principles that every mold user can use to ensure the efficient operatio...
More+
-
How to Maintain Injection Moulding Die Efficiently?
The maintenance quality of the injection mold directly affects the service life of the mold. Since the mold accounts for a large proportion of the production cost of the injection molding enterprise, ...
More+
-
Several Common Problems and Solutions of Plastic Injection Parts
Ⅰ. Reasons and solutions for deformation of plastic injection partsAn injection molded part is shaped like a cavity but is a twisted version of the cavity shape.1. Possible reasons for the problem(1)...
More+
-
Do You Know the Main Process Parameters of Plastic Injection Parts?
1. Barrel temperature of plastic injection parts:The melt temperature is important, and the injection cylinder temperature used is only a guideline. The melt temperature can be measured at the nozzle ...
More+
-
Description of ABS Molding Process
Ⅰ. The scope of application of ABS moldingAutomobiles (dashboards, tool hatches, wheel covers, mirror boxes, etc.), refrigerators, high-intensity tools (hair dryers, blenders, food processors, lawn m...
More+
-
-
86-0769-82926607
-
-
-