Feman Tooling Co.,Limited
Feman Tooling Co.,Limited
Contact Us

Blog

  • 20
    05
    2021
    Pay Attention to Pressure Changes when Processing Injection Molded Parts
    1. More and more injection molded productsIndustrial production has become an indispensable part of our lives, and plastics should be a widely used material. In fact, not only plastic products, but al...
  • 13
    05
    2021
    What Problems Will Occur in the Production of Injection Molded Parts in Electroplating?
    1. The electroplating of injection molded parts has replaced metal electroplating in more and more fieldsIn order to facilitate production and processing, injection molded parts are now used, because ...
  • 06
    05
    2021
    Matching of Injection Mold Maker and Injection Mold
    Most of the plastic products in daily life are produced by injection molding machines. The injection molding production of plastic products requires molds. That is to say, the complete injection moldi...
  • 22
    04
    2021
    Aspects to Consider when Choosing Injection Molding Machine
    Ⅰ. The production of plastics is inseparable from injection molding machinesInjection molding machine is widely used in the production of plastic products. Since the injection molding machine can rep...
  • 15
    04
    2021
    The Maintenance of Injection Molding Machine
    1. Daily maintenance of injection molding machine is essentialThe injection molding machine is a highly automated modern industrial machine. Its appearance has greatly improved the production efficien...
  • 08
    04
    2021
    Procedures for Operation of Injection Molding Machines
    Each industry has its own unique production standards. Effective production rules are necessary to ensure the safety of personnel and machines. Here are some operating procedures related to injection ...
  • 01
    04
    2021
    The Importance of Filters to Injection Molding Machine
    1. The filter is one of the most critical parts on the injection molding machineIt is a key component that prolongs the life of the injection molding machine and one of the biggest factors. Just like ...
  • 22
    03
    2021
    Introduction of How to Do the Injection Molding Process
    The process of the injection molding process mainly includes four stages: filling-holding pressure-cooling-demolding. These four stages directly determine the quality of the product, which is a comple...
  • 15
    03
    2021
    The Structure of the Injection Mold?
    The structure of the injection mold is determined by the type of injection molding machine and the structural characteristics of the plastic part. Each mold is composed of a movable mold and a fixed m...
  • 08
    03
    2021
    Precautions Before Mold Trial
    1. Understand the relevant information of the injection moldIt is best to obtain the design drawing of the injection mold, analyze it in detail, and invite mold technicians to participate in the trial...
  • 01
    03
    2021
    Basic Knowledge of Injection Molding
    The so-called injection molding refers to a method of injecting heated and molten material into a mold, and then cooling and solidifying to obtain a molded product. The specific process is to feed gra...
  • 22
    02
    2021
    Analysis of Unstable Gauge Problems of Plastic Injection Products
    1. Inconsistent molding conditions or improper operationProcess parameters such as temperature, pressure and time have to be strictly in line with process requirements. Particularly, the molding cycle...
  • 15
    02
    2021
    Analysis of Unstable Gauge of Plastic Injection Products
    1. Mold faultThe structure design and manufacturing precision of molds directly affect dimensional precision of plastic parts. In the forming process, insufficient rigidity or too high pressure inside...
  • 08
    02
    2021
    Reasons of Injection Mold Damage and Irregular Color
    The manufacturer's biggest headache is mold damage in the process of injection molding. Today let's share the reasons with everyone.1. If the injection molding mold is the same for a long time...
  • 01
    02
    2021
    Injection Molding Cooling Problems
    People in the industry all know that injection molding mold is a complicated step in processing. There are different views on cooling time after injection plastics are molded.In injection molding, the...