Feman Tooling Co.,Limited
Feman Tooling Co.,Limited
Contact Us

Blog

  • 01
    03
    2021
    Basic Knowledge of Injection Molding
    The so-called injection molding refers to a method of injecting heated and molten material into a mold, and then cooling and solidifying to obtain a molded product. The specific process is to feed gra...
  • 22
    02
    2021
    Analysis of Unstable Gauge Problems of Plastic Injection Products
    1. Inconsistent molding conditions or improper operationProcess parameters such as temperature, pressure and time have to be strictly in line with process requirements. Particularly, the molding cycle...
  • 15
    02
    2021
    Analysis of Unstable Gauge of Plastic Injection Products
    1. Mold faultThe structure design and manufacturing precision of molds directly affect dimensional precision of plastic parts. In the forming process, insufficient rigidity or too high pressure inside...
  • 08
    02
    2021
    Reasons of Injection Mold Damage and Irregular Color
    The manufacturer's biggest headache is mold damage in the process of injection molding. Today let's share the reasons with everyone.1. If the injection molding mold is the same for a long time...
  • 01
    02
    2021
    Injection Molding Cooling Problems
    People in the industry all know that injection molding mold is a complicated step in processing. There are different views on cooling time after injection plastics are molded.In injection molding, the...
  • 25
    01
    2021
    Causes of Coking in Injection Molding
    There will inevitably have the injection product discolored coking appear black spots and so on during the injection mold processing. The general reason for this problem is that plastics, ultraviolet ...
  • 18
    01
    2021
    Hole Design in Injection Molding
    Common holes in injection molding include through hole, blind hole, profile hole ( holes with complex shapes) and threader hole. All of these holes should be placed at where are difficult to weaken th...
  • 11
    01
    2021
    Operation Points of Injection Molding
    Injection molding is a method of molding industrial products. Injection molded parts often adopt plastic in injection molding which is divided into compression molding and die casting. Injection moldi...
  • 04
    01
    2021
    Characteristics of Injection Molding Processing
    Plastic products have already penetrated into every industry. The developing plastic performance makes parts which have to be made by metal can be entirely replaced by plastic accessories.The manufact...
  • 22
    12
    2020
    What Processing Parameters of Injection Molding
    Melted plastic particles are molded for plastic products in injection molding. The process is a little complex, demanding molding engineer to focus on some processing parameters to ensure the final qu...
  • 15
    12
    2020
    Cautions of Injection Molding Shells
    For the moment plastic products occupy 30% to 40% of the market share of the whole plastic products. The high efficiency and quality molding method has been favored by many enterprises, and the precis...
  • 08
    12
    2020
    Reasonability of Injection Molding Fees
    The improvement of plastic performance makes injection products satisfy lives in countless ways. Vehicles, computers and mobile phones involve accessories made from plastic, which shows that plastic i...
  • 01
    12
    2020
    Principles of Injection Molding Process
    Injection molding is a process in which plastic melt is injected into the closed mold cavity at high speed under high pressure, and then plastic injection products with the same shape as the cavity co...
  • 15
    11
    2020
    Eight Ways of Plastic Forming
    Plastics are ubiquitous in daily life. Whether daily necessities or industrial supplies has many different production modes. The below introduces eight common ways of plastic forming, helping to choos...
  • 12
    11
    2020
    Classifications of Injection Molding
    It's believed that anyone entering structure design knows injection molding is the most common process technology of plastic products. Things from button to bumper can all be made through injectio...