-
Difficulties in Injection Molding of Electrical Plastic Injection Parts for Plastic Parts Processing (2)
PlasticizerPlasticizers can increase the softness, elongation and plasticity of plastic, reduce the flow temperature and hardness of plastic, and contribute to the molding of plastic products, commonl...
More+
-
Search Result
More+
-
Discussion on the Problems Needing Attention in Two-color Mold Design by Feman (1)
The design of two-color mold is a pain for designers! If you want to design a perfect two-color mold, the cost will be high; if the design is too simple, the strength of the two-color mold may be affe...
More+
-
Sitemap
More+
-
Discussion on the Problems Needing Attention in Two-color Mold Design by Feman (2)
2. Moulding Method of Customer's Injection Molding Machine.Generally, the moulding methods of plastic injection moulding machines are press moulding, screw moulding, hydraulic moulding, magnetic m...
More+
-
404
404
More+
-
Cause Analysis on Warpage of Injection Molded Products
Deformation, bending and twisting in plastic injection occur mainly because that the shrinkage rate in flow direction is larger than that in vertical direction during plastic forming. And warpage is a...
More+
-
Privacy Policy
Privacy and Data CollectionThis website collects information from our users at several different points on our website in order to process reservations and better serve you with pertinent information....
More+
-
Cause Analysis on the Cracking of Injection Molding Products
Cracking of injection molding mold, including filamentous cracks, microcracks, abnormal whitening on the surface of the parts, and cracks caused by the mold being glued with parts and flow channel. Ac...
More+
-
Submission Successful!
Feman has strong confidence on our products. You can see some of our products below. If you are interested, you can click in to see the detail.
More+
-
Two Shot Injection Molding Process
The cover material is injected above, below, around or inside the substrate during the two shot injection molding process to form a complete part. This process can be done through multiple injections ...
More+
-
Taggg
More+
-
How to Increase Profits at Injection Molding Plants
The injection molding industry is a low-margin industry, which is a matter of public record. This, coupled with the low barrier to entry in the injection molding industry, where only a few injection m...
More+
-
Causes of Weld Marks of Plastic Products in Injection Molding
Injection moulding die makers own many new injection technology, but weld marks still occur during injection molding.The weld lines of plastic products are caused by the incomplete fusion of the fused...
More+
-
The Quality of Injection Molding Mold
Injection molding mold is the mother of industry. With the injection molding mold, plastic products that we need can be manufactured through plastic injection. And the injection molding is featured wi...
More+
-
-
86-0769-82926607
-
-
-